TECHTOM
MDM-100
MULTI DISPLAY MONITOR
For Toyota OBD1 Cars

 

www.technosquareinc.com

DISPLAY	STANDS FOR	EXPLANATION
INJ 00.00 ms	Injector Duty Time
Duty 0.0 %	Injector Duty Percentage
IGT 000 deg	Ignition Timing Degree
RPM 0000 rpm	Engine Speed RPM
SPD 000 kmh	Speed Kmh
SPD 000 mph	Speed Mph
WTMP 00 c	Water Temp Celsius
WTMP 00 f	Water Temp Fahrenheit
THP 0.0 deg	Throttle Position Degree
ISCS 000 STEP	Idle Regulator Valve Steps
ISCS 00.0 %	Idle Regulator Valve Percentage
PIMt 0.0 kpa	Intake Manifold Pressure Turbo
PIMn 0.0 kpa	Intake Manifold Pressure Non-turbo
AFMv 0.00 v	Air Flow Meter Signal Voltage
AFMg 0.00 g/s	Hot Wire Output g/s
	Karmen Output Time
STA-up  on/off	Cold Start On / Off
WARM-up  on/off	Warm up On / Off
A/F-L  on/off	A/F Adjustment Control On / Off
A/F-R  on/off	A/F Adjustment Control On / Off
KNOCK  on/off	Knock Sensor On / Off
STA-sw  on/off	Starter Switch Position On / Off
IDL-sw  on/off	Idle Switch Position On / Off
A/C-sw  on/off	Air Conditioning On / Off
NTL-sw  on/off	Neutral On > Off
O2-R  lean/rich	O2 Sensor LEAN / RICH
O2-L  lean/rich	O2 Sensor LEAN / RICH
DIAG  NG/OK	Diagnostic Condition OK / NG

MAJOR PARAMETERS Simply
access these major parameters with the simple 3-button control.

FEATURES
Easy connection – plugs into ROUND diagnostic port under
dash drivers side
16-bit CPU for high-performance processing
Heat resistant ABS plastic case
Industrial grade LCD screen with back lighting
Special heat resistant cable
Electronic control of LCD brightness and contrast
Nonvolatile memory – no need for backup battery
3-button control for ease of use

Normal Finish

 

Carbon Fiber Finish

 

1 Din Size