[mkiv] Re: Mounting HKS BOV with recirculation

[Gary Bechtold]

HKS Part number is 71007-AT012 for the Supra MK4 Kit.  It's model JZA80 
/ JZS161.  I got mine from MVP.  Here are some MVP Logo'd pics for you 
from their web site...

http://www.mvpmotorsports.com/merchant/catalog/JDM/T/SupraMKIV/P/HKS/hk_71007-at012a.jpg
http://www.mvpmotorsports.com/merchant/catalog/JDM/T/SupraMKIV/P/HKS/hk_71007-at012b.jpg

-Gary Bechtold
1997 Toyota Supra Turbo

----------------------------------------------------------------------

Message: 1
Date: Sun, 6 Jun 2010 01:15:34 -0700 (PDT)
From: Thomas Bradley <myothersupra at yahoo.com>
Subject: Re: [mkiv] Re: Mounting HKS BOV with recirculation

Hey Gary,

Those pics do a good job of showing where and how you mounted the valve.
What mount is that and where did you get it? I assume it's made by HKS 
for that valve?
I've seen the recirculation mode "insert" for sale that installs on the 
outlet side for converting it to the recirculation type but I haven't 
seen that inlet base you have with the hose fitting and valve flange on 
it before, especially as one complete unit that looks almost factory and 
fits in the stock BOV spot.

Thomas
myothersupra
--------------
98TT 6-Speed MkIV
93TT Auto MkIV (SOLD)
92T Auto MkIII
88 5-Speed MkIII
84 5-Speed MkII P-Type
81 5-Speed MkI
01 E-Shift IS300
01 5-Speed ZRX-1200R

--- On Sun, 5/30/10, Gary Bechtold <garybechtold at gmail.com> wrote:


From: Gary Bechtold <garybechtold at gmail.com>
Subject: [mkiv] Re: Mounting HKS BOV with recirculation
To: mkiv at mkiv.com
Date: Sunday, May 30, 2010, 1:49 AM

Here are some pictures I tried to take of the BOV with the recirculation 
fitting installed.  The TRD bar does get in the way of a clear shot. 
Hope that helps.  I could try to take some better ones again.

http://s202.photobucket.com/albums/aa311/garybechtold/HKS%20BOV/?albumview=slideshow

-Gary Bechtold
1997 Toyota Supra Turbo

On 5/2/2010 12:00 PM, mkiv-request at mkiv.com wrote:
> Today's Topics:
>
>     1. Mounting HKS BOV with recirculation (thumps00 at gmail.com)
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 1 May 2010 14:47:07 -0500
> From: thumps00 at gmail.com
> Subject: [mkiv] Mounting HKS BOV with recirculation
> To: "The MKIV.com National Mailing List"<mkiv at mkiv.com>
> Message-ID:
>     <k2q3c7ea0801005011247ibe92e90dz36e43194efcbee4 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> I know this has been discussed a little before, but:
>
> Has anyone successfully mounted the HKS BOV without a flange and used a
> recirculation fitting?
>
> If so, how and where did you mount it? Any pics would be appreciated.
>
> I can't seem to make it work in the stock location, the fitting sticks out
> too far. I couldn't quite find other arrangements that worked.
>
> BTW, there are smaller fittings that appear to be a better match for the
> stock recirculation connection - I ordered a 19mm recirculation fitting off
> of eBay.
>
> Thanks,
> Brian '94 TT
>