From garybechtold at gmail.com Mon Jun 7 00:41:00 2010 From: garybechtold at gmail.com (Gary Bechtold) Date: Mon Jun 7 00:41:08 2010 Subject: [mkiv] Re: Mounting HKS BOV with recirculation Message-ID: <4C0C866C.1070606@gmail.com> HKS Part number is 71007-AT012 for the Supra MK4 Kit. It's model JZA80 / JZS161. I got mine from MVP. Here are some MVP Logo'd pics for you from their web site... http://www.mvpmotorsports.com/merchant/catalog/JDM/T/SupraMKIV/P/HKS/hk_71007-at012a.jpg http://www.mvpmotorsports.com/merchant/catalog/JDM/T/SupraMKIV/P/HKS/hk_71007-at012b.jpg -Gary Bechtold 1997 Toyota Supra Turbo ---------------------------------------------------------------------- Message: 1 Date: Sun, 6 Jun 2010 01:15:34 -0700 (PDT) From: Thomas Bradley Subject: Re: [mkiv] Re: Mounting HKS BOV with recirculation Hey Gary, Those pics do a good job of showing where and how you mounted the valve. What mount is that and where did you get it? I assume it's made by HKS for that valve? I've seen the recirculation mode "insert" for sale that installs on the outlet side for converting it to the recirculation type but I haven't seen that inlet base you have with the hose fitting and valve flange on it before, especially as one complete unit that looks almost factory and fits in the stock BOV spot. Thomas myothersupra -------------- 98TT 6-Speed MkIV 93TT Auto MkIV (SOLD) 92T Auto MkIII 88 5-Speed MkIII 84 5-Speed MkII P-Type 81 5-Speed MkI 01 E-Shift IS300 01 5-Speed ZRX-1200R --- On Sun, 5/30/10, Gary Bechtold wrote: From: Gary Bechtold Subject: [mkiv] Re: Mounting HKS BOV with recirculation To: mkiv@mkiv.com Date: Sunday, May 30, 2010, 1:49 AM Here are some pictures I tried to take of the BOV with the recirculation fitting installed. The TRD bar does get in the way of a clear shot. Hope that helps. I could try to take some better ones again. http://s202.photobucket.com/albums/aa311/garybechtold/HKS%20BOV/?albumview=slideshow -Gary Bechtold 1997 Toyota Supra Turbo On 5/2/2010 12:00 PM, mkiv-request@mkiv.com wrote: > Today's Topics: > > 1. Mounting HKS BOV with recirculation (thumps00@gmail.com) > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 1 May 2010 14:47:07 -0500 > From: thumps00@gmail.com > Subject: [mkiv] Mounting HKS BOV with recirculation > To: "The MKIV.com National Mailing List" > Message-ID: > > Content-Type: text/plain; charset=ISO-8859-1 > > I know this has been discussed a little before, but: > > Has anyone successfully mounted the HKS BOV without a flange and used a > recirculation fitting? > > If so, how and where did you mount it? Any pics would be appreciated. > > I can't seem to make it work in the stock location, the fitting sticks out > too far. I couldn't quite find other arrangements that worked. > > BTW, there are smaller fittings that appear to be a better match for the > stock recirculation connection - I ordered a 19mm recirculation fitting off > of eBay. > > Thanks, > Brian '94 TT >