[mkiv] Mounting HKS BOV with recirculation

[Ryan Hanson]

All these tech questions can be answered by the dealer that sold you the BOV 
unless uou bought it on ebay, in which case be sure of its authenticity. 
HKS is hardcore whored and knocked off well now.  Like a rolex in times 
square.

Are you using a universal Valve and the 19mm resirc fitting for it, or a PN 
specifically for the MKIV?

C-clip style HKS weld in flange or install kit PN application specific can 
be used.  If using a factory side mount and want to keep it look into the 
HKS hard pipe kit.  They make 3 different sizes of resircs.

Ryan Foshay Hanson
NEAD LLC (Est. 96)
Performance specialist, advisor, installer, tuner, and consumer liason
207-655-9070 Voice and Data
207-409-2252 Text and Call 7am-9pm 7days
Warehouse and Tuning Location:
414 Roosevelt Trail
Casco Maine 04015
----- Original Message ----- 
From: <thumps00 at gmail.com>
To: "The MKIV.com National Mailing List" <mkiv at mkiv.com>
Sent: Saturday, May 01, 2010 3:47 PM
Subject: [mkiv] Mounting HKS BOV with recirculation


>I know this has been discussed a little before, but:
>
> Has anyone successfully mounted the HKS BOV without a flange and used a
> recirculation fitting?
>
> If so, how and where did you mount it? Any pics would be appreciated.
>
> I can't seem to make it work in the stock location, the fitting sticks out
> too far. I couldn't quite find other arrangements that worked.
>
> BTW, there are smaller fittings that appear to be a better match for the
> stock recirculation connection - I ordered a 19mm recirculation fitting 
> off
> of eBay.
>
> Thanks,
> Brian '94 TT
> _______________________________________________
> Mkiv mailing list
> Mkiv at mkiv.com
> http://www.mkiv.com/mailman/listinfo/mkiv