[mkiv] Wheel studs

[Mark Fleming]

Thankyou for the guidance will look into it

        Mark

-----Original Message-----
From: mkiv-bounces at mkiv.com [mailto:mkiv-bounces at mkiv.com] On Behalf Of John
Cribb
Sent: Thursday, 25 March 2010 8:10 PM
To: The MKIV.com National Mailing List
Subject: Re: [mkiv] Wheel studs

ARP make a very nice wheel stud for the Lexus IS300 (I think). Its splines
are a perfect match to the Supra hub, but the OA length of the studs is too
long for most street wheel applications, even with spacers, so it's just a
matter of figuring out how much thread engagement you want, and how long
they need to be, and cut the remainder off, either before or during install.

John
'97 6spd RSP APU Hardtop

--- On Thu, 3/25/10, Mark Fleming <markfleming at optusnet.com.au> wrote:

> From: Mark Fleming <markfleming at optusnet.com.au>
> Subject: [mkiv] Wheel studs
> To: mkiv at mkiv.com
> Date: Thursday, March 25, 2010, 3:40 AM
> Hi all, this is my first post. I have
> a 2001 TT 6 speed and when I imported
> it to Australia I purchased a set of wheels from the us
> ruff racing was the
> brand anyway on fitting I found I needed a 3mm spacer for
> the front. My
> problem is there is not a lot of thread to pull up on the
> wheel which has
> really worried me. My question is can anyone give me any
> clue where I can
> obtain some longer studs and doe's Toyota produce anything
> suitable.
> 
>  
> 
>                
>         Mark 
> 
> _______________________________________________
> Mkiv mailing list
> Mkiv at mkiv.com
> http://www.mkiv.com/mailman/listinfo/mkiv
> 



_______________________________________________
Mkiv mailing list
Mkiv at mkiv.com
http://www.mkiv.com/mailman/listinfo/mkiv