[mkiv] AEM WB AFR Controller

[Erven]

The FJO also have a dual wideband.

----- Original Message ----- 
From: "John Cribb" <johnacribb at yahoo.com>
To: "'The MKIV.com National Mailing List'" <mkiv at mkiv.com>
Sent: Wednesday, October 31, 2007 10:21 PM
Subject: [mkiv] AEM WB AFR Controller


> Anyone here running the AEM wideband unit? If so how do you like it?
>
> I've been running an FJO in my Supra since 2003, but am shopping for a 
> dual
> channel unit for the V8 swap. The AEM and the latest TechEdge both made 
> the
> shortlist, but the TechEdge has too many bells & whistles that I don't 
> need,
> (and don't want to pay for).
>
> One major plus that the AEM has is they claim it reads down to 0.55 
> Lambda.
>
> We broke in the 1UZ on an engine dyno last week; it really ran sweet. I 
> had
> set it up with a carburetor and a Ford EDIS8 standalone ignition to keep
> things as simple as possible, and it worked out really well.
>
> Here's a photo of the motor as I had it set up for the dyno:
> http://i169.photobucket.com/albums/u228/cribbj/IMG_0903Large.jpg. And yes,
> those are Supra COP's, and the box in back of the Holley is the Ford 
> EDIS8.
> Actually I found out a single EDIS8 wasn't enough to drive the coils, so I
> had to wire in a 2nd one in parallel to get it to run well.
>
> Here's a video of the last pull where it's running with the paralleled
> EDIS8's:
> http://s169.photobucket.com/albums/u228/cribbj/?action=view&current=MVI_1019
> .flv
>
> John
> '97 APU
> '94 BPU
>
>
> _______________________________________________
> Mkiv mailing list
> Mkiv at mkiv.com
> http://www.mkiv.com/mailman/listinfo/mkiv
>